BRAND Hydraulic Hand Pump - HP121DA95 Vertical Mount

Brand Hydraulics IH-HP121DA95

Availability: In stock


Quick Overview

Manual Hydraulic Hand Pump by Brand Hydraulics
Model# HP121DA95

Hydraulic Hand Pump - Brand HP121DA95

More Views


BRAND Hydraulic Hand Pump - HP121DA95 The Brand, hand operated hydraulic pump comes in three basic models HP121DA, HP61DA and HP22SA. Each one of these models comes with a relief that can be adjusted manually to suit the customer’s requirements. Brand hydraulic hand pumps feature redesigned outlet check seats for zero leakage. The zero leak seat was created by utilizing an o’ring seal to replace the steel ball seal. The NT (no tank) option does not have a tank, pressure relief and release valve. To use the NT option the customer must connect the inlet of the hand pump to an external reservoir (external reservoir is not supplied by Brand). The TL (2 in. tank) option has a small tank, pressure relief and release valve. To use the TL option the customer must connect the fill port on the tank to an external reservoir (external reservoir is not supplied by Brand). When mounting the NT or TL option, the manual hydraulic pump should be placed below the fluid level of the external reservoir HP121DA – has a large double-acting piston that can pump 1.20 in3 (19.7 cm3) per full cycle. The term double-acting means that the piston pumps fluid when the handle is pushed and pulled. The pressure rating is lower then the HP22SA and HP61DA because it takes a greater amount of force to displace a piston that has a large surface area. This manual hydraulic pump is typically used in applications that require high volume displacement and lower pressure.


-O’RING PORT to eliminate leakage. -DELRIN SEAT to seal between tank inlet and piston reservoir. -O’RING OUTLET CHECK for zero leakage. -O’RING SEAL between tank and casting. -STEEL BALL RELEASE VALVE relieves outlet pressure. -EVERY HP IS TESTED for outlet check leakage, double or single pump action and relief setting. -OPTIONAL HORIZONTAL MOUNTING BRACKETS allows for horizontal handle actuation.

Product Specifications

Motor PhaseNo
Action TypeNo
Tank CapacityNo
Tank MaterialNo
Mounting StyleNo
Relief Setting3,000 PSI
Pressure ReliefNo
Port Size1/2"
Port TypeNPT


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.


No comments just yet - be the first!

To reduce spam, and make this discussion more useful to our customers, you must be logged in to post a comment.

Powered by Magento Discussion Extension.