Brand Hydraulics Loader Valve w/ Regen & Float LV22RFSTKAB

Brand Hydraulics IH-LV22RFSTKAB

Availability: In stock


Quick Overview

Brand Hydraulics Monoblock Loader Valve - 10 GPM

Loader Valve -Brand LV22RFSTKAB Hydraulic Valve

More Views


Brand Hydraulic Loader Directional Control Valve #LV22RFSTKAB


The Brand LV22, loader directional control valve, is a superbly designed two spool monoblock valve suitable for Front End Loaders. The LV22 offers two parallel, tandem center 4-way work sections with float and regenerative action. The valve is also field convertible to closed center or power beyond with the appropriate cartridge. All ports on the hydraulic joystick are #8SAE and integrated relief valve. Rated for 10GPM and 4000psi.

Made in the USA


  • O’RING PORTS to eliminate leakage.
  • FOURTH POSITION REGEN allows cylinder to rapidly extend.
  • POWER BEYOND CAPABILITY to fit your multi valve circuits.
  • INDIVIDUAL DROP LOAD CHECKS prevent the load from dropping when the spool is shifted.
  • FOURTH POSITION FLOAT allows spool movement to a fourth position and makes all ports common to each other.


  • 10 gpm (38 lpm) Nominal Capacity.
  • Rated up to 4000 psi (275 bar).
  • Port Sizes-Inlet/Outlet #8SAE (3/4-16).
  • Work Ports #8 SAE (3/4-16).
  • 25 Micron Filtration Recommended.
  • Weight -LV22 = 10.9 lbs. (4.9 kg).



  • Cast Iron Body
  • Buna N O’Rings
  • IOSSO Plated Steel Spools
  • Black Nylon Ball Knob


Product Specifications

Spool Type4 Way / 4 Pos
Spool ActionSpring w/ Float Detent
Spool CenterTandem
Port TypeNPT
Inlet Port#8
Outlet Port#8
Work Ports#8
Pressure ReliefAdjustable
Relief Setting4000
Circuit TypeSeries

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.


4 Item(s)
per page
  • From Matt at 1/15/13 10:34 AM
    • I have a JD 2840 that I am puting an allied 394 loader on. The zetor it came off of was open valve and the John Deere is closed valve. Is this the system I need?
    • If it's going on a "closed center" system, like on JD's you will need to convert it to a closed center valve using the LV2-C cartridge kit. Call us @ 800-231-4515 to order the kit.
  • From Duane at 2/3/13 3:31 PM
    • I have a JD 2955 with a 260 loader on it and the mid mount control valve is wore and not rebuildable. Do you have a replacment for it?
    • Not a "Direct" replacement, but one the Brand valves should work fine when converted to closed center. This will also save you a lot of money over an OEM loader valve.
  • From Bob at 3/8/13 6:39 PM
    • Does the Brand Hydraulics IH-LV22RFSTKAB valve come with the power beyond cartridge? If not, how do I order that part and what is the cost? This will be going on a Kubota B-7100 with a 1630 loader.

    • LV2-W is the Power beyond cartridge part#. You can call in to order it, but it's not online just yet.
  • From phantomfly at 4/14/13 6:41 PM
    • Will this valve operate my loader in dump mode and it bi driectional ? I have a large bucket on an old F 8N which is powered by 4 hydraulic cylinders, 2 operating tandem for dump and 2 for raising the bucket. Thanks
    • Yes, this loader valve is built to operate 2 hydraulic circuits like that.
To reduce spam, and make this discussion more useful to our customers, you must be logged in to post a comment.

Powered by Magento Discussion Extension.